Housing connectors achieve rated performance only when installed with appropriate tooling. The conical wedge locking mechanism requires precise bore dimensions and controlled installation torque.
Housing connector production systems
CNC Drilling Specifications
| Parameter |
Requirement |
Why It Matters |
| Spindle speed |
8,000-12,000 RPM |
Clean bore surface finish |
| Feed rate |
1,000-2,000 mm/min |
Prevents material tear-out |
| Position accuracy |
±0.05mm |
Correct connector alignment |
| Depth control |
±0.1mm |
Proper wedge engagement |
| Perpendicularity |
<0.5° |
Even load distribution |
Assembly Tooling
| Tool |
Accuracy |
Calibration |
| Torque-controlled driver |
±0.5 Nm |
Daily |
| Bore go/no-go gauge |
±0.02mm |
Monthly |
| Depth gauge |
±0.1mm |
Weekly |
QC Sampling Protocol
| Check |
Frequency |
Method |
| Bore diameter |
First piece + every 50 |
Go/no-go gauge |
| Bore depth |
First piece + every 50 |
Depth gauge |
| Assembly torque |
Every 20 units |
Torque wrench |
| Pull-out test |
Every 100 units |
Test fixture |
Production-ready housing connectors
0 条评论